Performance Counters

The following list of performance counters have been modified to include the most pertinent in identifying the bottleneck of your system. This list is for reference purposes. If needing to troubleshoot slowness read troubleshooting sql server slowness.

Memory

Object: – Memory
Counter: – Available Mbytes
Preferred Value: – > 2000MB
Description: With 64 bit OS’s the available bytes recommendation has increased.

Object: – Memory
Counter: – Pages/Sec
Preferred Value: – < 50 Description: - Pages/sec is the rate at which pages are read from or written to disk to resolve hard page faults. Indicative of possible page file usage, and definitely a memory bottleneck somewhere on the system. Object: - Paging File Counter: - %Usage Preferred Value: - < 5% Description: - Current amount of Page file being used. This is a key number when weighing the amount of memory allocated to the OS. If this number is high, then the OS is choked for RAM. Either increase the RAM on the box or deallocate from SQL. If this is between 10% and 25% you should reboot. Object: - Paging File Counter: - %Usage Peak Preferred Value: - < 15% Description: - Show the peak the page file got to since the last reboot. Usually this is not too far off from the page file usage %. Unfortunately when page file issues happen, they do not correct themselves without a reboot. Object: - SQL Server:Buffer Manager Counter: - Page Life Expectancy Preferred Value: - > 300
Description: – The single most important factor in determining whether your SQL Server has enough RAM allocated to it. The greater the number the better off you are. Historically it is said that over 300 is good. If this number is low and you do have a lot of RAM allocated, then the issue is probably lack of indexes. Index scans read in a lot of rows into the buffer pool whereas a seek only reads in a small subset. Investigate indexes.

Object: – SQL Server:Buffer Manager
Counter: – Buffer Cache hit ratio
Preferred Value: – > 90%
Description: – Percentage of pages that were found in the buffer pool without having to incur a read from disk. If this number is low, then you are probably reading from the paging file. Reboot.
Reference: –

Disk Bottleneck Analysis

Object: – PhysicalDisk
Counter: – Avg. Disk Sec/Read
Preferred Value: – < 8ms Description: - Measure of disk latency. Avg. Disk sec/Read is the average time, in seconds, of a read of data from the disk. While it is better to have fast disk read times, this can easily be compensated for by allocating enough RAM to the server and to SQL. More Info: Reads or non cached Writes Excellent < 08 Msec ( .008 seconds ) Good < 12 Msec ( .012 seconds ) Fair < 20 Msec ( .020 seconds ) Poor > 30 Msec ( .030 seconds )

Object: – PhysicalDisk
Counter: – Avg. Disk sec/Write
Preferred Value: – < 8ms (non cached) < 1ms (cached) Description: - Measure of disk latency. Avg. Disk sec/Write is the average time, in seconds, of a write of data to the disk. Reference: - Object: - PhysicalDisk Counter: - Avg. Disk Read Queue Length Preferred Value: - < 2 * spindles Description: - Avg. Disk Read Queue Length is the average number of read requests that were queued for the selected disk during the sample interval. If this is high, you are probably missing indexes; doing deletes where you could be doing truncates; or could simply be selecting too much data. More Info: < (2+ no of spindles) Excellent < (2*no of spindles) Good < (3* no of spindles) Fair Note: If the disk has say 20 disk and it is RAID 10 then no. of spindles = 20/2 = 10. If it is RAID 5 then the no. of spindles = no of disks = 20. Reference: - Object: - PhysicalDisk Counter: - Avg. Disk Write Queue Length Preferred Value: - < 2 * spindles Description: - Avg. Disk Write Queue Length is the average number of write requests that were queued for the selected disk during the sample interval. Reference: - Object: - SQL Server:Buffer Manager Counter: - Page reads/sec Preferred Value: - < 90 Description: - Number of physical database page reads issued. 80 – 90 per second is normal, anything that is above indicates indexing or memory constraint. Reference: - Object: - SQL Server:Buffer Manager Counter: - Page writes/sec Preferred Value: - < 90 Description: - Number of physical database page writes issued. 80 – 90 per second is normal, anything more we need to check the lazy writer/sec and checkpoint counters, if these counters are also relatively high then, it's memory constraint. Reference: -

Processor

Object: – Processor
Counter: – %Processor Time
Preferred Value: – < 60% Description: - % Processor Time is the percentage of elapsed time that the processor spends to execute a non-Idle thread. The consensus is generally that over 80% you officially have a processor bottleneck. What needs to be taken into consideration here is the number of cores and if hyper-threading is turned on. Aside from the fact that you should not turn on hyper-threading on a SQL Server box, if you do, this number should probably be around 50%. Hyper-threading is not a true processor, it is unused cycles of another processor. Also, if you have over 4 cores, I would recommend this number be no more than 55%. While high processor utilization may seem like a major issue, it is actually one of the best bottlenecks to have because it is the easiest to fix. It is usually lack of indexing. Reference: - Object: - SQLServer:Access Methods Counter: - Full Scans / sec Preferred Value: - < 1 Description: - If we see high CPU then we need to invistigate this counter, otherwise if the full scan are on small tables we can ignore this counter. Values greater than 1 or 2 indicates that we are having table / Index page scans. We need to analyze how this can be avoided. Reference: - Object: - SQLServer:Access Methods Counter: - Worktables Created/Sec Preferred Value: - < 20 Description: - Number of worktables created in tempdb per second. Worktables are used for queries that use various spools (table spool, index spool, etc). Even if you see this as high there is likely very little you can do about it. It requires rewriting your procedures. Reference: - Object: - SQLServer:Access Methods Counter: - Workfiles Created/Sec Preferred Value: - < 20 Description: - Number of work files created per second. Tempdb workfiles are used in processing hash operations when the amount of data being processed is too big to fit into the available memory. They may be able to reduce this number by making the queries more efficient by adding/changing indexes, adding additional memory, etc. Reference: - Object: - SQLServer:Access Methods Counter: - Page Splits/sec Preferred Value: - < 20 Description: - Interesting counter that can lead us to our table / index design. This value needs to be low as possible. If you find out that the number of page splits is high, consider increasing the fillfactor of your indexes. An increased fillfactor helps to reduce page splits because there is more room in data pages before it fills up and a page split has to occur. Reference: -

Overall SQL Server Bottleneck Analysis

Object: – SQLServer:General Statistics
Counter: – User Connections
Preferred Value: –
Description: – The number of users currently connected to the SQL Server.

Object: – SQLServer:General Statistics
Counter: – Logins/sec
Preferred Value: – < 2 Description: - > 2 per second indicates that the application is not correctly using connection pooling.

Object: – SQLServer:General Statistics
Counter: – Logouts/sec
Preferred Value: – < 2 Description: - > 2 per second indicates that the application is not correctly using connection pooling.

Object: – SQLServer:SQL Statistics
Counter: – Batch Requests/Sec
Preferred Value: – > 300
Description: – The higher this number, the better. What it generally means is that your SQL Server can scale when needed. If you see peaks hit over 2000, then you are on your way to an optimized box. I have worked with servers that never got over 150. Then after changing a critical process like removing a scalar UDF from a computed column, or rewriting a critical process to not use looping, see this number hit over 500 to 2000.

Object: – SQLServer:SQL Statistics
Counter: – SQL Compilations/sec
Preferred Value: – < 10% of the number of Batch Requests / sec Description: - Not a major indicator. I would not worry too much about it, however be aware of it. Object: - SQLServer:SQL Statistics Counter: - SQL Re-Compilations/sec Preferred Value: - < 10% of the number of SQL Compilations/sec Description: - No you don't want recompilations, and the higher the number here, probably the more temp tables you use. Not much you can do about this except change code.

Transaction Management

Object: – SQL Server:Locks
Counter: – Number of Deadlocks/sec
Preferred Value: – < 1 Description: - The number of lock requests that resulted in a deadlock. Object: - SQL Server:Locks Counter: - Lock Requests/sec Preferred Value: - < 1000 Description: - Not a critical number but watch it. The higher it gets generally means you are missing indexes. Object: - SQL Server:Locks Counter: - Average Wait Time (ms) Preferred Value: - < 500 Description: - This is the average wait time in milliseconds to acquire a lock. Lower the value the better it is. If the value goes higher then 500, there may be blocking going on; we need to run blocker script to identify blocking.

5 comments
Maria 29 Aug 2015 at 5:19 am

salaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaam azizaam,khoobi?khoshi?che kbraaha?baba bacheh pooldari ke hesab banki makhsoos baz mikonid,mara niz daryabid!!khoobi golam,che kare khoobi kardi golam rafti biroon,che ali,baba mashhad ke hamash jaye didaniye,too khooneh namoon golam,say kon ta jaee ke barat maghdooreh beri biroon va hava bokhori ,ham halo havat avaz mishe,ham,barat salamati lazeme golam,Aida jan chera oon looleh ro dar nemiyaran?mage alan ke khodet tanafos mikoni,oon ham karbordi dareh??hamino bayad taviz koni?boro tanbal ,boro avazesh kon bad baz vasat zemestoon bahooneyeh sarmaro miyari,va sakhtar ham hast too zemestoon rafto amad,vali Aida jooniiiiiiiiii kheyli kheyliiiiiiiiiii khoshhal shodam rafti biroon,Aida ma too daneshgahemoon ye nabeghe darim ke oonam to yek hadeseh,masdoom shodeh,vali miad daneshgah,khob inja emkanat kheyli fargh mikoneh vali inke inghad mosamam havaye -30 darajeye soedo miayd daneshgah kheyli sotoodaniye,kheyli ham basavadeh ,va darskhoon mese to,too sathe master hast,too fizik ,man ta moshkele darsi too darsaye khodam daram miram pish oon vay ba inke ham reshtam nist vali chenan mozooe ro baram baz mikoneh ke keyf mikonam,tazeh kheyli ham jedi badesh soal mikoneh,ke motmaen she soalet ro khoob fahmidi,vay harvaght mibinamesh behesh migam to Aidaye mani!!!!,oonam mige khoob to mano Aida seda kon,esmesh Linda hast va man barash taghriban tamam jaryane toro tarif kardam,va hameye etefaghate too bimarestano moo be moo tarif kardam,yek bar chenan zad zireh geryeh ke khodam pashimoon shodam,chera barash goftam,oonam sepordeh be man ke behet begam ke kheyli kheyli doostet dareh ba inke nadideh toro vali kheyli darket mikoneh,va az inke oonjoori bahat raftar shodeh faghat taasof mikhoreh,migoft nazaramo rajebe ,kadre pezeshkiye keshvaretoon avaz kardi!!!!ma ham goftim ghabeli nadareh,!oh man cheghad por harfam khahar joonaaaaam,felan booooooooooooooooos va baye,__________________________________________آیدا :سلاااام دایانای عزیزم جوجوی من چطوره؟ :*خیلی ممنونم از لطفتون. چشم حتما بیشتر میرم بیرون.لوله رو بخاطر تنگی تراشه (نای) دارم. بدون لوله نایم تنگ و راه تنفسم بسته میشه بله، همین رو باید عوض کنم. ایشالا تا قبل از شروع ترم میرم. چشم به لیندا خیلی خیلی سلام برسونید و بگین که من هم خیلی دوستش دارم و تحسینش می کنم. امیدوارم سلامت و موفق باشه خیلی ممنونم دایانای عزیزم :*

Anil 03 Apr 2014 at 1:18 pm

Hi,

This is a good article. Please provide the link from where you are getting the preferred or ideal values of the counters.

turban 28 Apr 2012 at 12:58 pm

hey there and thanks on your info ? I have definitely picked up something new from right here. I did however expertise some technical points the usage of this website, as I skilled to reload the website a lot of occasions prior to I may just get it to load correctly. I have been wondering if your hosting is OK? Now not that I am complaining, however sluggish loading instances instances will often have an effect on your placement in google and can injury your high quality rating if advertising and marketing with Adwords. Anyway I am including this RSS to my email and could look out for a lot extra of your respective intriguing content. Ensure that you update this once more very soon..

James L 16 Dec 2011 at 9:24 am

Thanks…been looking for something like this!

Cezar Mihaila 08 Jun 2011 at 9:13 am

Very nice and useful article. Many Thanks!

Featured Articles

 Site Author

  • Thanks for visiting!
css.php